Install guide

60 OSPF Enhancements Release Note
Software Version 2.9.1
C613-10486-00 REV C
Command Reference Updates
This section describes the changed portions of modified commands. The new
options are shown in bold.
disable ospf debug
Syntax DISable OSPF DEBug={ALL|AUTOcost|IFSTate|LSU|NBRSTate|
NSSA|PACket|NRL|REDistribute|SPF|STAte}
Description The option nrl has been added to the debug parameter. If you specify nrl,
neighbour retransmission list debugging is disabled.
enable ospf debug
Syntax ENAble OSPF DEBug={ALL|AUTOcost|IFSTate|LSU|NBRSTate|
NSSA|PACket|NRL|REDistribute|SPF|STAte}
[TIMEOut={NONE|1..2400}]
Description The option nrl has been added to the debug parameter. If you specify nrl, the
router or switch displays changes to the neighbour retransmission list. Note
that this option may generate large amounts of debugging output on a large
OSPF network. Use it with care.