Install guide

Software Version 2.9.1 39
Software Version 2.9.1
C613-10486-00 REV C
set ddns
Syntax SET DDNS [SERVER=server] [PORT=port] [USer=userid]
[PASSword=password] [DYNamichost=hostnames]
[CUSTomhost=hostnames] [STAtichost=hostnames]
[PRImaryint=interface] [SECOndaryint=interface]
[WILdcard={ON|OFF|NOCHG}]
[MAIlexchanger={mailexchanger|NOCHG}]
[BAckmx={YES|NO|NOCHG}] [OFFline={YES|NO}]
Description This command sets the parameters used for updating the Dynamic DNS.
Parameter Description
SERVER The name of the DDNS server. It is a string of up to 31 characters,
having a URL name format.
Default: members.dyndns.org
PORT Specifies the remote port number to be used by a local HTTP client in
order to convey the Dynamic DNS Update. Only port numbers 80,
8245 and 443 can be used. Ports 80 and 8245 are for HTTP, and port
443 is for HTTPS. Port 8245 may be used to bypass transparent HTTP
proxies.
Default: 80
USer A user name used for an account with Dynamic DNS. It may contain
up to 15 printable characters and is case sensitive. If the name
contains spaces, these must be enclosed in double quotes.
Default: no default.
PASSword A password to be used with Dynamic DNS account. It may contain up
to 15 printable characters and is case sensitive. If the password
contains spaces, these must be enclosed in double quotes.
Default: no default.
DYNamichost Host names to be used with Dynamic DNS. Each name may contain up
to 31 printable characters having a URL format. If a name contains
spaces, these must be enclosed in double quotes. Up to four comma
separated names can be entered. All names must be Internet
registered.
Defaults: no default.
CUSTomhost Host names for Custom DNS. Each name may contain up to 31
printable characters having a URL format. If a name contains spaces,
these must be enclosed in double quotes. Up to four comma
separated names can be entered. All names must be Internet
registered.
Defaults: no default.
STAtichost Host names to be used for Static DNS. Each name can be up to 31
printable characters long and is case sensitive. Up to four comma
separated names can be entered.
Default: no default.
PRImaryint An interface to be used for the primary WAN connection. The IP
interface must be pre-defined.
Default: no default.
SECOndaryint The interface to be used for the secondary WAN connection. The IP
interface must be pre-defined.
Default: no default.