Install guide

24 show macff interface counter Software Reference
show macff interface counter
Syntax SHOW MACFF INTerface=vlan [POrt=port-list] COUNTer
Description This command displays MAC-Forced Forwarding counters for each port on an
VLAN (Figure 6, Table 4).
The port parameter allows you to select only a subset of ports to display
information about. port-list is either a specific port, a range of ports using a
hyphen to specify the range (n-m), or a comma-separated list of ports or port
ranges. Port numbers start at 1 and end at m, where m is the highest numbered
switch Ethernet port, including uplink ports.
Figure 6: Example output from the show macff interface counter command
MAC Forced Forwarding Information:
---------------------------------------------------------------------------
Interface ............... vlan2
Status .................. ENABLED
IP address............... 20.1.1.1
Ports:
Tagged ................ None
Untagged .............. 2,22
Active servers .......... 6
Debugging ............... NONE
Counters for Port: 2
ARP Counters:
Requests ................. 2301 Replies .................. 0
Resolution Request ....... 48 Resolutions Failed ....... 43
Src : No DHCPSN ENTRY .... 42 Scr : Inconsistent Data .. 0
Src : No Routers ......... 1 Scr : No Routers Found ... 0
Dest: No DHCPSN ENTRY .... 0 S/D : Same Port .......... 0
Counters for Port: 22
ARP Counters:
Requests ................. 1 Replies .................. 0
Resolution Request ....... 8 Resolutions Failed ....... 0
Src : No DHCPSN ENTRY .... 2 Src : Inconsistent Data .. 0
Src : No Routers ......... 0 Src : No Routers Found ... 0
Dest: No DHCPSN ENTRY .... 0 S/D : Same Port .......... 0
------------------------------------------------------------------------------
Table 4: Parameters in the output of the show macff interface counter command
Parameter Meaning
Interface VLAN that MAC-Forced Forwarding is configured on.
Status Current state of MAC-Forced Forwarding on the VLAN, either
ENABLED or DISABLED.
IP Address IP address assigned to the VLAN.
Ports: Tagged The tagged ports assigned to the VLAN; tagged ports transmit
VLAN tagged frames.
Ports: Untagged The untagged ports assigned to the VLAN; untagged ports
transmit frames without VLAN tags.