Install guide

MAC-Forced Forwarding reset macff counter 15

reset macff counter

Syntax RESEt MACFF COUNTer [POrt=port-list]

Description This command resets all the current MAC-Forced Forwarding counter

information for a range of ports, or all ports.

The port parameter allows you to select only a subset of ports to reset the

counters for. port-list is either a specific port, a range of ports using a hyphen to

specify the range (n-m), or a comma-separated list of ports or port ranges. Port

numbers start at 1 and end at m, where m is the highest numbered switch

Ethernet port, including uplink ports.

This command requires a user with security officer privilege when the switch

is in security mode.

Examples To reset the MAC-Forced Forwarding counters for ports 2, 3, 4, 5 and 8, use the

command:

res macff count po=2-5,8