Install guide

Link Layer Discovery Protocol (LLDP) show lldp neighbour 43
For more information about LLDP parameters, see the IEEE Standard 802.1AB-
2005.
Examples To display the neighbour information for port 1 and 2 in detail, use the
command:
sh lldp nei po=1,2 det
To display the neighbour information for all ports in summary, use one of the
commands:
sh lldp nei
sh lldp nei port=all
See Also disable lldp port
enable lldp port
show lldp
show lldp counters
lldpRemOrgDefInfoSubtype The subtype of the organisationally defined information
received from the neighbour.
lldpRemOrgDefInfoIndex An arbitrary local integer value used by your LLDP agent to
identify a particular, unrecognized, organisationally defined
information instance.
lldpRemOrgDefInfo The organisationally defined information associated with
the neighbour.
Table 4: Parameters in output of the show lldp neighbour command (cont.)
Parameter Meaning