Install guide

LLDP TLVs A list of the LLDP optional TLVs currently advertised on the
listed ports, one or more of:
• PD - Port Description
• SN - System Name
• SD - System Description
• SC - System Capabilities
• MA - Management Address
LLDP local system data
This section is displayed only when you specify the localdata parameter.
lldpLocChassisIdSubtype The type of encoding used to identify the chassis associated
with your local system.
lldpLocChassisId The chassis ID associated with your local system. This is the
MAC address.
lldpLocSysName The system name of your local system.
lldpLocSysDesc A textual description of your local system, including the full
name and version identification of your system's hardware
type, software operating system, and networking software.
lldpLocSysCapSupported The system’s currently supported primary functions.
lldpLocSysCapEnabled The system’s currently enabled primary functions.
lldpLocManAddrTable
LLDP local management address MIB information. This is displayed only when you have
both set and enabled an LLDP management address.
lldpLocManAddrSubtype The type of encoding used to identify the management
address associated with your local system.
lldpLocManAddr The IPv4 management address that is currently set for your
local system. To set a management address, use the set lldp
managementaddress command.
lldpLocManAddrLen The total combined length of the management address
subtype field, and the management address field in
LLDPDUs transmitted by your local LLDP agent.
lldpLocManAddrIfSubtype The interface numbering method used to define the
interface number associated with your local system.
lldpLocManAddrOID Currently unsupported.
lldpLocPortTable
LLDP port information.
LLDP LLDP standard TLV configuration.
lldpLocPortIdSubtype The type of encoding used to identify the port identifier
associated with your local system.
lldpLocPortId The port identification for the specified port in your local
system.
lldpLocPortDesc The IEEE 802 LAN station's port description associated with
your local system.
LLDP port configuration
This section is displayed only when you specify the detail parameter.
Port The port number.
Table 1: Parameters in output of the show lldp command (cont.)
Parameter Meaning