Install guide

30 show lldp Software Reference
Figure 1: Example output from the show lldp port command
LLDP configuration
LLDP global configuration:
msgTxInterval ......................... 30
msgTxHold ............................. 4
reinitDelay ........................... 2
txDelay ............................... 2
Notification interval ................. 5
Management address .................... 00-09-41-4c-d0-18
Total current neighbours .............. 0
Too many neighbours events ............ 0
System errors ......................... 0
LLDP port configuration:
Port adminStatus Notifications LLDP TLVs
------------------------------------------------------------
1 txOnly enabled PD SN SD SC MA
2 rxOnly disabled - - - - -
3 txAndRx enabled PD SN SD SC -
4 disabled enabled PD SN SD SC MA
5 txAndRx disabled PD SN SD SC MA
eth0 disabled disabled PD SN SD SC MA
eth1 disabled disabled PD SN SD SC MA
Key:
PD ........ Port description
SN ........ System name
SD ........ System description
SC ........ System capabilities
MA ........ Management address