Install guide

100 show pim Software Reference
show pim
Syntax SHow PIM
Description This command displays detailed information about the PIM routing status on
the switch, and is equivalent to specifying all of the following commands in the
following order:
1. show PIM interface
2. show PIM route
3. show PIM neighbour
4. show PIM counters
5. show PIM debug
6. show PIM rpcandidate
7. show PIM bsrcandidate
8. show PIM rpset
9. show PIM timer
10. show PIM config
Examples To display detailed PIM routing status information, use the command:
sh pim
Related Commands disable pim
enable pim
set pim
show pim bsrcandidate
show pim counters
show pim debug
show pim interface
show pim neighbour
show pim route
show pim rpcandidate
show pim rpset
show pim timer