Install guide

IP Multicasting show ip igmp 93
Examples To display general information about IGMP, use the command:
sh ip igmp
To limit the display to IP interfaces that have multicast group memberships
matching 224.*.*.*, use the command:
sh ip igmp des=224.*.*.*
To display information about IGMP on interface “vlan1”, use the command:
sh ip igmp int=vlan1
Related Commands add ip igmp destination
create ip igmp destination
delete ip igmp destination
destroy ip igmp destination
disable ip igmp
disable ip igmp interface
enable ip igmp
enable ip igmp interface
set ip igmp
show ip igmp counter
Static Ports The list of static ports listening to this group. This is a
subset of the ports listed in the Ports field, and is only
displayed for static groups on a VLAN.
Table 5: Parameters in output of the show ip igmp command (cont.)
Parameter Meaning