Install guide

66 enable igmpsnooping Software Reference
enable igmpsnooping
Syntax ENAble IGMPSNooping
Description This command enables IGMP snooping on the switch. IGMP snooping is
enabled by default. IGMP snooping can be enabled only when a free Layer 3
filter is available.
Note that IGMP snooping is independent of IGMP, which is disabled by
default.
Examples To enable IGMP snooping, use the command:
ena igmpsn
Related Commands disable igmpsnooping
disable ip igmp
disable ip igmp interface
enable ip igmp
enable ip igmp interface
show ip igmp
show igmpsnooping
enable ip igmp
Syntax ENAble IP IGMP
Description This command enables IGMP on the switch. IGMP is disabled by default.
IGMP snooping is enabled by default and is independent of IGMP.
Examples To enable IGMP, use the command.
ena ip igmp
Related Commands disable ip igmp
enable ip igmp interface
show ip igmp