Install guide

IP Multicasting disable ip igmp 61
disable igmpsnooping
Syntax DISable IGMPSNooping
Description This command disables IGMP snooping on the switch. IGMP snooping is
enabled by default. Note that multicast packets flood the VLAN when IGMP
snooping is disabled.
Disabling IGMP snooping may be useful when filters are used extensively
because IGMP snooping uses a Layer 3 filter. When IGMP snooping is
disabled, this filter becomes available.
Note that IGMP snooping is independent of IGMP, which is disabled by
default.
Examples To disable IGMP snooping, use the command:
dis igmpsn
Related Commands disable ip igmp interface
enable igmpsnooping
enable ip igmp
enable ip igmp interface
show ip igmp
show igmpsnooping
disable ip igmp
Syntax DISable IP IGMP
Description This command disables IGMP on the switch so that multicast routing stops
immediately. IGMP is disabled by default. IGMP snooping is enabled by
default and is independent of IGMP.
Examples To disable the IGMP module, use the command:
dis ip igmp
Related Commands disable ip igmp interface
enable ip igmp
show ip igmp