Install guide

58 delete pim rpcandidate Software Reference
delete pim rpcandidate
Syntax DELete PIM RPCandidate[=rp-address] GROup=group-address
[MASK=ipaddress]
where:
■ group-address is the IP address of the multicast group in dotted decimal
notation.
■ ipaddress is an IP address in dotted decimal notation.
■ rp-address is an IP address in dotted decimal notation.
Description This command deconfigures the switch from acting as a rendezvous point
candidate for a multicast group.
The rpcandidate parameter is the IP address of the rendezvous point for the
multicast group when it is specified with a value. This option can be used to
remove a static RP mapping.
The mask parameter specifies the mask for the multicast group address
specified with the group parameter. This is useful when deconfiguring
multiple multicast groups with a common rendezvous point (RP). The default
mask is 255.255.255.255.
Examples To stop the switch from advertising itself as an RP candidate for multicast
group 224.1.1.98, use the command:
del pim rpc gro=224.1.1.98
Related Commands add pim rpcandidate
disable pim
show pim
show pim rpcandidate