Install guide

44 add ip mvr Software Reference
add ip mvr
Syntax ADD IP MVR VLAN=1..4094 GROupaddress=ipadd[-ipadd]
where ipadd is an IP address in dotted decimal notation
Description This command adds an MVR IP multicast group address or range of addresses
on a switch. All source ports and receiver ports belonging to this multicast
group receive multicast data sent to this group address.
The vlan parameter specifies the VLAN identifier with which the multicast
VLAN is associated.
The groupaddress parameter specifies the multicast group IP address or range
of IP addresses that belong to the multicast VLAN.
Examples To add a multicast IP group address on a multicast VLAN, use the command:
add ip mvr vlan=22 gro=230.1.1.1
Related Commands delete ip mvr
show ip mvr