Specifications

6 Rapier Series Switch
C613-03020-00 REV J
Power Supply Unit
AC models
• Universal 110/240 VAC 50/60 Hz input
• Redundant DC Power connection
DC models
• 48 VDC (39-60 VDC is acceptable)
•4 Amps
• Positive or negative earthing (grounding).
Switching Core
Rapier 8/8MT, 8/8SC, 16F-FX/MT, 16F-FX/SC, 24, 48
• Application-Specific Integrated Circuit (ASIC) switch chip
• Non-blocking L2 and L3 IP Switching
Rapier G6, G6F/LX, G6F/SX, G6F/MT
• Gigabit ASIC switch chip
• Non-blocking L2 and L3 IP Switching
Rapier 16Fi-FX/MT, 16Fi-FX/SC, 24i, 48i
• Advanced ASIC switch chip
• Non-blocking L2 and L3 IP Switching
Processing Core
• 200 MHz RISC Processor (250 MHz for Rapier 24i models with revision
N or higher PCBs)
• 32 MBytes Synchronous DRAM
• 6 MBytes flash memory (16 MBytes for Rapier i models)
• 128 KBytes Non-volatile Storage (battery backed SRAM)
Asynchronous Serial Port
•Up to 115 kbps
• Standard DB9 female RS-232 connector
• Hardware-flow control
PCI Accelerator Card (PAC) Slot
(Not included on the Rapier 48, 48i, G6, or G6F.)
• For an optional 32-bit PCI based hardware Encryption and or
Compression Card
Uplink Module Bays
• 2 very high performance bays
• Support for gigabit Ethernet uplink modules (Rapier G6 and Rapier i
switches support 10BASE-T/100BASE-TX in addition to 1000BASE-T)