Specifications

Hardware Reference 5
C613-03020-00 REV J
Hardware Overview
This section provides an overview of the hardware features for the Rapier
Switch series. Hardware descriptions for Uplink Modules, NSMs, and PICs can
be found in their respective hardware references. These references can be found
on the CD-ROM bundled with your switch, or can be downloaded from from
www.alliedtelesis.com/support/software.
Rapier Switches combine wire-speed Layer 2 and 3 switching with full
multiprotocol routing capabilities to deliver low-latency high-bandwidth
traffic capabilities to the desktop. Ethernet, fast Ethernet and gigabit Ethernet
connectivity with both copper and fibre optic interfaces make the Rapier Series
a versatile and powerful switching solution.
Dimensions
• Height = 66 mm (plus 5.5 mm if the rubber feet are used)
• Width = 440 mm (excluding rack-mounting brackets)
• Depth = 360 mm (including NSM face-plate)
• Weight = Not more than 7 kg, depending on model (excluding NSMs,
PICs, and power cord)
Mounting System
• 1.5U rack mounting
Environmental Conditions
• Operating temperature range: 0 to 40º C (32 to 104º F)
• Storage temperature range: -25 to 70º C (-13 to 158º F)
• Relative humidity range: 5 to 95% non-condensing
Regulatory Standards
• EMC: CISPR22 class A, FCC class A, and VCCI class I
• Immunity testing to EN50082 levels 2 (ESD), 3 (susceptibility), 4 (fast
transients), 5 (power surge), and 6 (RF immunity)
• Safety: UL1950, CSA22.2, EN60950
LEDs
• Ethernet port and System status LEDs
• For a complete list of LEDs and their functions, see “Fault Indicators
and What They Mean” on page 24.