Specifications

Hardware Reference 7
C613-03020-00 REV N
Rapier 8/8MT, 8/8SC, 16F-FX/MT, 16F-FX/SC, 24, 48
■ ASIC switch chip
■ Non-blocking L2 and L3 IP switching
Rapier G6, G6F/LX, G6F/SX, G6F/MT
■ Gigabit ASIC switch chip
■ Non-blocking L2 and L3 IP switching
Processing core All models except Rapier 48w and 48w-B
■ 200MHz RISC processor (250MHz for Rapier 24i models with revision N
or later PCBs)
■ 32MBytes Synchronous DRAM
■ 6MBytes flash memory (16MBytes for Rapier i models)
■ 128KBytes Non-volatile Storage (battery backed SRAM)
Rapier 48w and 48w-B
■ 350MHz processor
■ 64MBytes Synchronous DRAM
■ 32MBytes flash memory
■ 512KBytes Non-volatile Storage (battery backed SRAM)
Asynchronous
serial port
■ Up to 115 kbps
■ Standard DB9 female RS-232 connector
■ Hardware-flow control
■ Two ports on Rapier 48w and 48w-B, one port on all other models
PCI Accelerator Card
(PAC) slot
All models except Rapier 48, 48i, 48w, 48w-B, G6, and G6F
■ Accepts an optional 32-bit PCI-based hardware encryption and/or
compression card
Uplink module bays All models except Rapier 48w and 48w-B
■ Two very high performance bays
■ Support for 1000BASE-T Ethernet uplink modules on all models
■ Support for 10BASE-T/100BASE-TX Ethernet uplink modules on
Rapier G6 and Rapier i switches
Network Service
Module (NSM) bay
All models except Rapier 48, 48i, G6, G6F/SX, and G6F/LX
■ Support for one 32-bit PCI based WAN module
SFP ports Rapier 48w and 48w-B
■ Two 1000BASE-X SFP ports