Specifications

50 Rapier Series Switch
C613-03020-00 REV N
Figure 31: Rapier Switch diagnostics banner page
Running a
diagnostic program
To run a diagnostic program, enter the corresponding number or letter. There
are several sub-menus to cover all the available options. Table 24 lists the
control keys for diagnostic operations.
A reasonable understanding of the systems structure is needed to operate
diagnostics and interpret the results.
Restoring normal
operation
To restore the switch to normal operation, use a pen or pencil to operate the
recessed reset button on the front panel, or press “0” (zero) to restart.
* * * Diagnostic Mode * * *
version 16-Mar-98
Main Menu:
0. Restart
1. Full RAM test
2. ROM checksum test
3. Full FLASH test
4. Totally Erase FLASH
5. Battery backed RAM test
Enter selection ==>
Table 24: Basic commands for running the diagnostics
Key Function
Q Quits any running tests and displays the banner page.
S Prints a summary of test results so far.