Specifications

6 Rapier Series Switch
C613-03020-00 REV K
Regulatory
Standards
All models except Rapier 48w
■ EMC: CISPR22 class A, FCC class A, and VCCI class A
■ Immunity: EN50082 levels 2 (ESD), 3 (susceptibility), 4 (fast transients), 5
(power surge), and 6 (RF immunity)
■ Safety: UL1950, CSA22.2, EN60950
Rapier 48w
■ EMC: EN55022 class A, and FCC class A
■ Safety: UL60950-1, CAN/CSA22.2 No. 60950-1-03, 21 CFR 1040
■ NEBS: GR-1089-Core Issue 4, GR-63-Core Issue 3
LEDs ■ Ethernet port and System status LEDs
■ “Find Me” LED display feature (Rapier 48w only)
■ For a complete list of LEDs and their functions, see ““LEDs and What They
Mean” on page 34” on page 24
NEBS Rapier 48w
■ Meets the electrical criteria for NEBS certification
■ Meets the physical and air filtering criteria for NEBS certification
Power Supply Unit AC models
■ Universal 110–240VAC, 50–60Hz input
■ Redundant DC Power connection
DC models except Rapier 48w
■ Input voltage 48VDC nominal, 39–60VDC is acceptable
■ 4Amps
■ Positive or negative earthing (grounding)
Rapier 48w
■ Input voltage 48VDC nominal, 40–60VDC is acceptable
■ 4Amps
■ Positive or negative earthing (grounding).
■ 100W
■ Fuse rating of fuses F1 and F2 on the DC ORing/PEM board: 125VDC, 4A
(e.g. Littelfuse 0451.004)
Switching Core Rapier 16Fi-FX/MT, 16Fi-FX/SC, 24i, 48i, 48w
■ Advanced ASIC switch chip
■ Non-blocking L2 and L3 IP Switching
Rapier 8/8MT, 8/8SC, 16F-FX/MT, 16F-FX/SC, 24, 48
■ ASIC switch chip
■ Non-blocking L2 and L3 IP Switching