user manual

Overview
16
Summary of Features
The AT-MC606 VDSL Network Extender using coaxial cable provides the
following features:
 Extend Ethernet over shielded coaxial cable using VDSL (Very high-
bit-rate Digital Subscriber) protocol
 10Base-T/100Base-TX Ethernet port with an RJ-45 connector
– Auto MDI/MDI-X on Ethernet port
– Auto-Negotiation for speed and duplex mode
(IEEE 803.3u-compliant)
 VDSL BNC coaxial connector
– Fast and Interleaved mode latency configurations
– Symmetrical and asymmetrical transmit/receive
configurations
– Signal-to-Noise settings for different coaxial line lengths
 Status LEDs for both 10Base-T/100Base-TX and VDSL Line ports
 12V DC external power supply input port
 Installation on desktop, wall, DINRAIL, or rack mounting in an
AT-MCR12 Media Conversion Rack-Mount Chassis
 Fully EU RoHS and China RoHS compliant
Figure 1. illustrates the front panel of the AT-MC606 VDSL Network
Extender.
Figure 1. AT-MC606 Front Panel
Ethernet Port
VDSL Line
LEDs
Ethernet
Status
LEDs
1931
ASYMFASTSCBR
6dB
SYM
INTL
PROV
9dB
VDSL CONFIG
10Base-T/
100Base-TX
LNK/ACT
100M
PWR
VDSL LINE
LINK
RATE
PROV
SCBR
AT-MC606 VDSL EXTENDED ETHERNET
VDSL Configuration
Switches
Coaxial VDSL
Power LED
Line Port
Subscriber/
Provider LED