User's Manual
Table Of Contents
- Contents
- Preface
- Chapter 1
- Chapter 2
- Installing the AT-MWS2533AP Access Point
- Reviewing Safety Precautions
- Unpacking the AT-MWS2533AP Access Point
- Unpacking the AT-BRKT-MWS01 Mounting Base Plate
- Unpacking the AT-MWS0091 AC Adapter Kit
- Installing the Access Point on a Celling or Wall
- Connecting the Access Point with the Ethernet Cable
- Connecting the AC Adapter
- Assembling the AT-MWS0091 AC Adapter
- Installing the AT-MWS2533AP Access Point
- Chapter 3
- Appendix A
Chapter 3: Installing the AT-MWS600AP or AT-MWS1750AP Access Point
44
Unpacking the AT-MWS600AP or AT-MWS1750AP Access Point
To unpack the AT-MWS600AP or AT-MWS1750AP access point, perform
the following procedure:
1. Remove all components from the shipping boxes.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Verify that all components listed in Table 7 are included in your
shipping boxes.
Table 7. Components in the Shipping Boxes
Name Component
Mounting
base kit
1 x Mounting base
2 x Screw for the
mounting base
(M2.6 9.8mm)