User's Manual
Table Of Contents
- Contents
- Preface
- Chapter 1
- Chapter 2
- Installing the AT-MWS2533AP Access Point
- Reviewing Safety Precautions
- Unpacking the AT-MWS2533AP Access Point
- Unpacking the AT-BRKT-MWS01 Mounting Base Plate
- Unpacking the AT-MWS0091 AC Adapter Kit
- Installing the Access Point on a Celling or Wall
- Connecting the Access Point with the Ethernet Cable
- Connecting the AC Adapter
- Assembling the AT-MWS0091 AC Adapter
- Installing the AT-MWS2533AP Access Point
- Chapter 3
- Appendix A
Chapter 2: Installing the AT-MWS2533AP Access Point
36
Figure 9. Installing the Mounting Base Plate on the Ceiling or Wall
5. Insert the two pins on the mounting base plate into the circles of the
keyhole slots, as shown in Figure 10.
Figure 10. Aligning the Access Point with the Mounting Base Plate
6. Slide the access point to lock the necks of the mounting base plate
pins in the slots, as shown in Figure 11 on page 37.