User's Manual
Table Of Contents
- Contents
- Preface
- Chapter 1
- Chapter 2
- Installing the AT-MWS2533AP Access Point
- Reviewing Safety Precautions
- Unpacking the AT-MWS2533AP Access Point
- Unpacking the AT-BRKT-MWS01 Mounting Base Plate
- Unpacking the AT-MWS0091 AC Adapter Kit
- Installing the Access Point on a Celling or Wall
- Connecting the Access Point with the Ethernet Cable
- Connecting the AC Adapter
- Assembling the AT-MWS0091 AC Adapter
- Installing the AT-MWS2533AP Access Point
- Chapter 3
- Appendix A
Chapter 2: Installing the AT-MWS2533AP Access Point
32
Unpacking the AT-MWS0091 AC Adapter Kit
The AT-MWS0091 AC adapter, which features an interchangeable AC
plug, was built with the AC plug for USA when shipped from the factory.
You can change the AC plug to another AC plug for Europe, UK, or
Australia.
To unpack the AT-MWS0091 AC adapter kit, perform the following
procedure:
1. Remove all components from the shipping box.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Verify that all components listed in Table 6 are included in your
shipping boxes shown in Table 6.
Table 6. Components in the Shipping Box
Name Component
AC adapter and
plug for USA
(APD2-US)
Plug for UK
(APD2-UK)
Plug for Europe
(APD2-EU)