User's Manual
Table Of Contents
- Contents
- Preface
- Chapter 1
- Chapter 2
- Installing the AT-MWS2533AP Access Point
- Reviewing Safety Precautions
- Unpacking the AT-MWS2533AP Access Point
- Unpacking the AT-BRKT-MWS01 Mounting Base Plate
- Unpacking the AT-MWS0091 AC Adapter Kit
- Installing the Access Point on a Celling or Wall
- Connecting the Access Point with the Ethernet Cable
- Connecting the AC Adapter
- Assembling the AT-MWS0091 AC Adapter
- Installing the AT-MWS2533AP Access Point
- Chapter 3
- Appendix A
MWS Series Access Point Installation Guide
29
Warning
This equipment shall be installed in a Restricted Access location.
E45
Warning
Hot Surface, Do Not Touch! - The finned surface on the back of the
chassis is a heat sink and can become dangerously hot when the
unit is operating. E114
Warning
To prevent electric shock, slide the AC power plug into the AC/DC
power adapter before plugging into the AC power wall receptacles.
E116
The following warning applies only to the AT-MWS1750AP model:
Warning
Operating Temperature. This product is designed for a maximum
ambient temperature of 40 degrees C. E7
The following warning applies only to the AT-MWS2533AP model:
Warning
Operating Temperature. This product is designed for a maximum
ambient temperature of 50°C E57