User's Manual
Table Of Contents
- Contents
- Preface
- Chapter 1
- Chapter 2
- Installing the AT-MWS2533AP Access Point
- Reviewing Safety Precautions
- Unpacking the AT-MWS2533AP Access Point
- Unpacking the AT-BRKT-MWS01 Mounting Base Plate
- Unpacking the AT-MWS0091 AC Adapter Kit
- Installing the Access Point on a Celling or Wall
- Connecting the Access Point with the Ethernet Cable
- Connecting the AC Adapter
- Assembling the AT-MWS0091 AC Adapter
- Installing the AT-MWS2533AP Access Point
- Chapter 3
- Appendix A
MWS Series Access Point Installation Guide
21
3On-On
The access point drains power through the DC
jack. LAN2 is standby.
4On--
The access point drains power through the DC
jack. No redundancy.
5--On
The access point drains power through the
LAN2 port. No redundancy.
6-On
The access point drains power through the
LAN1 port. No redundancy.
8-OnOn
The access point drains power through the
LAN2 port. LAN1 is standby.
Table 2. Power Source for the AT-MWS2533AP Model (Continued)
Case
Power Supply
Where the Access Point drains power
DC Jack LAN1 LAN2