User's Manual
Table Of Contents
- Contents
- Preface
- Chapter 1
- Chapter 2
- Installing the AT-MWS2533AP Access Point
- Reviewing Safety Precautions
- Unpacking the AT-MWS2533AP Access Point
- Unpacking the AT-BRKT-MWS01 Mounting Base Plate
- Unpacking the AT-MWS0091 AC Adapter Kit
- Installing the Access Point on a Celling or Wall
- Connecting the Access Point with the Ethernet Cable
- Connecting the AC Adapter
- Assembling the AT-MWS0091 AC Adapter
- Installing the AT-MWS2533AP Access Point
- Chapter 3
- Appendix A
MWS Series Access Point Installation Guide
15
AT-MWS2533AP
Model
The AT-MWS2533AP model is a dual band access point with two PoE+
LAN ports, which can drain power from the connected PoE+ switch. The
access point is illustrated in Figure 3.
Figure 3. The Top Panel of the AT-MWS2533AP Model
The front side of the AT-MWS2533AP model is illustrated in Figure 4.
Figure 4. The Front Side View of the AT-MWS2533AP Model
The right side of the AT-MWS2533AP model is illustrated in Figure 5.
Figure 5. The Right Side View of the AT-MWS2533AP Model
LAN Ports
DC Jack
Reset button
Kensington key hole