User's Manual

Dynamic inter-VRF routing between the global VRF domain and a VRF instance
Page 80 | Configure VRF-lite
The global parameter in the command neighbor x.x.x.x remote-as <64515> global is
required to facilitate an e-BGP peering to the global VRF domain from VRF red.
Conversely, the target vrf-name in the command neighbor x.x.x.x remote-as <64512> vrf
<red> is required to be configured to facilitate an e-BGP peering to VRF red from the global
VRF domain.
Additionally, the global VRF domain contains remote-as 64512, and local-as 64515 to ensure
e-BGP is used for internal peering to VRF red.
Conversely, VRF red contains remote-as 64515, and local-as 64512 to ensure e-BGP is used
for internal peering to the global VRF domain.