User's Manual

Configure VRF-lite | Page 67
Configuring a complex inter-VRF solution
hostname green_i_BGP_peer
!
vlan database
vlan 2-3 state enable
!
interface port1.0.2
switchport access vlan 2
!
interface port1.0.3
switchport access vlan 3
!
interface vlan1
ip address 192.168.20.2/24
!
interface vlan2
ip address 192.168.15.1/24
!
interface vlan3
ip address 192.168.16.1/24
!
router bgp 100
bgp router-id 192.168.20.2
redistribute connected
neighbor 192.168.20.1 remote-as 100
neighbor 192.168.20.1 activate
!
green_i_bgp_peer#show ip route
Codes: C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
* - candidate default
Gateway of last resort is 192.168.20.1 to network 0.0.0.0
B* 0.0.0.0/0 [200/0] via 192.168.20.1, vlan1, 00:02:58
B 2.2.2.2/32 [200/0] via 192.168.20.1, vlan1, 00:02:58
B 5.5.5.5/32 [200/0] via 192.168.20.1, vlan1, 00:02:58
C 192.168.15.0/24 is directly connected, vlan2
C 192.168.16.0/24 is directly connected, vlan3
C 192.168.20.0/24 is directly connected, vlan1
B 192.168.44.0/24 [200/0] via 192.168.20.1, vlan1, 00:02:58
B 192.168.100.0/24 [200/0] via 192.168.20.1, vlan1, 00:02:58
green_i_BGP_peer#