System information

41
Appendix: Commands available in each mode
Global Configuration mode
awplus(config)#?
Configure commands:
access-list Add an access list entry
arp Address Resolution Protocol (ARP)
auth-mac IPI MAC-Based Authentication
banner Define a login banner
bgp Border Gateway Protocol (BGP)
boot Boot configuration
class-map Class map command
clock Manage clock
crypto Security Specific Commands
debug Debugging functions (see also 'undebug')
default Restore default settings
do To run exec commands in config mode
dot1x IEEE 802.1X Port-Based Access Control
enable Modify enable password parameters
epsr Ethernet Protection Switching Ring (EPSR)
exception Configure exception settings
exit End current mode and down to previous mode
fib FIB information
gvrp GARP Vlan Registration Protocol
help Description of the interactive help system
hostname Set system's network name
interface Select an interface to configure
ip Internet Protocol (IP)
ipv6 Internet Protocol version 6 (IPv6)
key Authentication key management
lacp LACP commands
line Configure a terminal line
log Logging control
mac mac address
mail Send an email
max-fib-routes Set maximum fib routes number
max-static-routes Set maximum static routes number
maximum-access-list Maximum access-list entries
maximum-paths Set multipath numbers installed to FIB
mls Multi-Layer Switch(L2/L3)
no Negate a command or set its defaults
ntp Configure NTP
ospf Open Shortest Path First (OSPF)
pam Pluggable Authentication Module
ping-poll Ping Polling
platform Configure global settings for the switch asic
policy-map Policy map command
radius-server RADIUS server configuration commands
rip Routing Information Protocol (RIP)
rmon Remote Monitoring Protocol (RMON)
route-map Create route-map or enter route-map command mode
router Enable a routing process
router-id Router identifier for this system
--More--