System information

4
How to log in
How to log in
Set the baud rate of your terminal emulator to 11 5200.
For bootloader version 1.0.8 and earlier, this is the switch’s default value. You can use a
bootloader menu option to change it, but the first time you access the switch, you must use
11 5200.
Note that in bootloader version 1.0.9, the default baud rate will change to 9600.
Like in AlliedWare, the defaults are:
username: manager
password: friend
The switch logs you into User Exec mode. From User Exec mode, you can perform high-level
diagnostics (some show commands, ping, traceroute etc), start sessions (Telnet, SSH), and
change mode.
1. Set the console baud rate
2. Login with manager/friend