System information

19
How to save and boot from the current configuration
To see the files that the switch uses at startup, enter Privileged Exec mode and enter the
command:
awplus#show boot
The output looks like this:
When you next want to save the current configuration, enter Privileged Exec mode and enter
the command:
awplus#copy running-config startup-config
The parameter startup-config is a short-cut for the current boot configuration file.
3. Display the new settings
Boot configuration
--------------------------------------------------------------------
Current software : r1-5.2.1.rel
Current boot image : flash:/r1-5.2.1.rel
Backup boot image : Not set
Default boot config: flash:/.configs/default.cfg
Current boot config: flash:/example.cfg (file exists)
4. Continue updating the file when you change the configuration