Switch User Manual

78 Internet Protocol (IP) Enhancements Release Note
Software Version 2.8.1
C613-10477-00 REV B
show ip filter
Syntax SHow IP FILter[= 0..999]
Figure 20: New parameters in example output from the show ip filter command
show ip udp
Syntax SHow IP UDP
Description The output of this command now includes a new “Process” field, and has
different information in the “Local address” field (Figure 21, Table 1 9).
Figure 21: Updated example output of the show ip udp command
IP Filters
--------------------------------------------------------------------------------
No. Filter Type
Ent. Source Port Source Address Source Mask Session Size
Dest. Port Dest. Address Dest. Mask Prot.(C/T) Options
Pattern Type Act/Pol/Pri Logging Matches
--------------------------------------------------------------------------------
2 Traffic
1 Any 192.168.166.2 255.255.255.255 Any Yes
Any 192.168.163.39 255.255.255.255 Any No
General Include Off 0
2 Any 192.168.163.21 255.255.255.255 Any Yes
23 192.168.163.39 255.255.255.255 TCP No
General Exclude Off 0
Requests: 0 Passes: 0 Fails: 0
--------------------------------------------------------------------------------
Table 18: New parameters in output of the show ip filter command
Parameter Meaning
Filter Type The filter type of the pattern; one of “Traffic”, “Policy“, “Priority”, or
“Routing“.
Pattern Type Whether the pattern type is general or specific.
Local port Local address Remote port Process
------------------------------------------------------------
1698 1.1.3.1 4660 RSVP
5023 0.0.0.0 5023 SRLP LOG
5024 0.0.0.0 5024 NETM LOG
1701 3.3.3.2 0 L2TP
520 1.1.2.2 0 RIP
514 0.0.0.0 514 SYSLOG
------------------------------------------------------------