Switch User Manual

64 Internet Group Management Protocol (IGMP) Enhancements Release Note
Software Version 2.8.1
C613-10477-00 REV B
show igmp filter
Syntax SHow IGMP FILter[=filter-id]
where:
■ filter-id is a decimal number from 1 to 99.
Description The output of this command includes new fields.
Figure 14: Example output from the show igmp filter command
IGMP Filters
-------------------------------------------------------------------------------
No. Entry Group Address Range Msg Type Action Matches
-------------------------------------------------------------------------------
1 224 224.1.2.3 - 224.1.2.3 Report Exclude 10
229 229.1.1.1 - 229.2.2.2 Leave Include 2
Reports - Recd: 80 Passed: 70 Dropped: 10
Queries - Recd: 0 Passed: 0 Dropped: 0
Leaves - Recd: 2 Passed: 2 Dropped: 0
-------------------------------------------------------------------------------
Table 13: New parameters in the output of the show igmp filter command
Parameter Meaning
Msg Type The type of IGMP message being filtered by this entry; one of
“Leave”, “Query”, or “Report”.
Reports,
Queries,
Leaves
The total number of IGMP messages of the specified type that
were received and processed on all the switch ports that this filter
is attached to.
Recd The number of IGMP messages of the specified type that were
received on all the switch ports that this filter is attached to.
Passed The number of IGMP messages of the specified type that were
received and accepted on all the switch ports that this filter is
attached to.
Dropped The number of IGMP messages of the specified type that were
received and discarded on all the switch ports that this filter is
attached to.