Switch User Manual

106 BGP Enhancements Release Note
Software Version 2.8.1
C613-10477-00 REV B
add bgp peertemplate
Syntax ADD BGP PEERTemplate=1..30 [CLIEnt={NO|YES}]
[CONnectretry={DEFault|0..4294967295}]
[DESCription={NONE|description}]
[HOLdtime={DEFault|0|3..65535}]
[INFilter={NONE|prefixlist-name}]
[INPathfilter={NONE|1..99}]
[INRoutemap={NONE|routemap}]
[KEEpalive={DEFault|1..21845}] [LOCal={NONE|1..15}]
[MAXPREFIX={OFF|1..4294967295}]
[MAXPREFIXAction={Terminate|Warning}]
[MINAsoriginated={DEFault|0..3600}]
[MINRouteadvert={DEFault|0..3600}]
[NEXthopself={NO|YES}]
[OUTFilter={NONE|prefixlist-name}]
[OUTPathfilter={NONE|1..99}]
[OUTRoutemap={NONE|routemap}]
[PRIVateasfilter={NO|YES}] [SENdcommunity={NO|YES}]
disable bgp backoff
Syntax DISable BGP BACkoff
Description This new command stops BGP backoff. BGP backoff delays BGP processing
when the system memory utilisation is high.
BGP backoff is disabled by default, however it automatically enables the first
time a peer is added.
Example To disable BGP backoff, use the command:
dis bgp bac
Parameter Description
DESCription A description for the peers that use the template, which has no effect
on their operation. The new none option allows you to not specify a
description, or remove a previously specified description.
Default: none.
INRoutemap The route map that filters and/or modifies prefixes from peers that use
the template. The new none option allows you to not specify a route
map, or remove a previously specified route map.
Default: none
OUTRoutemap The route map that filters and/or modifies prefixes sent to peers that
use this template. The new none option allows you to not specify a
route map, or remove a previously specified route map.
Default: none