Owner manual

Allied Telesyn AT-VIEW PLUS
AMIGO
4.4 SNMP
From the SNMP menu, you can perform the following SNMP operations.
Topics:
• Get Values
• Get Values and Next To
• Set Values
• Save Values
• Load Values From a File
4.4.1 Get Values
Gets MIB values for variables selected on the MIB tree. These MIB values are
retrieved from the SNMP agent on the currently selected device. The currently
selected device is displayed in the area under the MIB tree. Retrieved values are
displayed in the MIB Operation Panel.
PN 613-50662-00 Rev B Page 45 of 48