Owner manual

Allied Telesyn AT-VIEW PLUS
AMIGO
2.2 Configuring AMIGO
AMIGO's general configuration can be changed from the File > Property menu.
This includes MIB files, target IP addresses or host names, web browser settings,
and window layout settings.
When you first run AMIGO, a dialog box opens in which you can enter these
settings. By default, you can browse the MIB-II tree only. If this is all you
require, click Cancel to close the dialog box. This configuration can be changed
later.
Configuration window for AMIGO
PN 613-50662-00 Rev B Page 14 of 48