Datasheet

ManualsBrandsAllied Telesis ManualsNetworkingAT-STACKXS/1.0

100

101

102

103

104

105

106

107

108

Table Of Contents

Contents
Figures
Tables
Preface
- Document Conventions
- Contacting Allied Telesis
Chapter 1
Overview
- Features
- Front and Rear Panels
- Management Panel
- 10/100/1000Base-T Twisted Pair Ports
- SFP+ Slots
- Stacking SFP+ Slots
- eco-friendly Button
- LEDs
- USB Port
- Console Port
- Power Supplies
Chapter 2
Virtual Chassis Stacking
- Overview
- Stacking Slots
- Stacking Transceivers
- Stacking Port Topologies
- Master and Member Switches
  - Selection of the Master Switch
  - ID Numbers
- Specifying Ports in the Command Line Interface
Chapter 3
Beginning the Installation
- Reviewing Safety Precautions
- Choosing a Site for the Switches
- Planning a Stack
- Unpacking the Switch
Chapter 4
Installing the Switches on a Table or in an Equipment Rack
- Installing the Switches on a Table or Desktop
- Installing the Switch in an Equipment Rack
Chapter 5
Verifying the Status of VCStack
- Verifying the Status of VCStack
- Activating the VCStack Feature
  - Starting a Local Management Session
  - Activating VCStack
Chapter 6
Cabling the Stacking Ports
- Cabling Switches with AT-StackXS/1.0 Transceivers
- Cabling Switches with AT-StackOP/0.3 or AT-StackOP/9.0 Transceivers
Chapter 7
Powering On the Stack
- Powering On the Switches Individually
- Powering On the Switches Simultaneously
- Verifying the Stack
  - Setting the Priority Numbers
- Monitoring the Initialization Processes
Chapter 8
Cabling the Networking Ports
- Cabling the Twisted Pair Ports
- Installing SFP and SFP+ Transceivers
Chapter 9
Troubleshooting
Appendix A
Technical Specifications
- Physical Specifications
- Environmental Specifications
- Power Specifications
- Certifications
- Quality and Reliability
- RJ-45 Twisted Pair Port Pinouts
- RJ-45 Style Serial Console Port Pinouts
- Fiber Optic Specifications of the AT-StackOP/0.3 and AT-StackOP/9.0 Transceivers

Appendix A: Technical Specifications

108

Table 19 lists the fiber optic port specifications for the AT-StackOP/9.0

transceiver.

Transmitter

Wavelength 850 nm

Output Optical Power -7.3 dBm min.

Receiver

Wavelength 850 nm

Maximum Sensitivity -9.9 dBm

Maximum Input Power -1 dBm

Table 19. Fiber Optic Port Specifications for the AT-StackOP/9.0

Transceiver

General

Maximum Distances 9 km

Fiber Optic Cable 9/125 µm (core/cladding) single-

mode fiber optic cable

Transmitter

Wavelength 1310 nm

Output Optical Power -8.2 dBm min.

+0.5 dBm max.

Receiver

Wavelength 1310 nm

Maximum Sensitivity -14.4 dBm

Maximum Input Power 0.5 dBm

Table 18. Fiber Optic Port Specifications for the AT-StackOP/0.3 Module