Datasheet
Table Of Contents
- Contents
- Figures
- Tables
- Preface
- Chapter 1
- Overview
- Chapter 2
- Virtual Chassis Stacking
- Chapter 3
- Beginning the Installation
- Chapter 4
- Installing the Switches on a Table or in an Equipment Rack
- Chapter 5
- Verifying the Status of VCStack
- Chapter 6
- Cabling the Stacking Ports
- Chapter 7
- Powering On the Stack
- Chapter 8
- Cabling the Networking Ports
- Chapter 9
- Troubleshooting
- Appendix A
- Technical Specifications

x510 Series Installation Guide for Virtual Chassis Stacking
107
RJ-45 Style Serial Console Port Pinouts
Table 17 lists the pin signals of the RJ-45 style serial Console port.
Fiber Optic Specifications of the AT-StackOP/0.3 and AT-StackOP/9.0
Transceivers
Table 18 lists the fiber optic port specifications for the AT-StackOP/0.3
transceiver.
Table 17. RJ-45 Style Serial Console Port Pin Signals
Pin Signal
1 Looped to pin 8.
2 Looped to pin 7.
3 Transmit Data
4 Ground
5 Ground
6 Receive Data
7 Looped to pin 2.
8 Looped to pin 1.
Table 18. Fiber Optic Port Specifications for the AT-StackOP/0.3 Module
General
Maximum Distances 33 m with 62.5/125 µm (core/
cladding) multimode fiber optic
cable
300 m with 50/125 µm (core/
cladding) multimode fiber optic
cable
Fiber Optic Cable 50/125 µm or 62.5/125 µm (core/
cladding) multimode fiber optic
cable