Installation guide

SwitchBlade x8112 Chassis Switch and AT-SBx81CFC960 Card Installation Guide
Section II: Installing the Chassis 109
Figure 44. Items Included with the AT-SBxPWRSYS1 Power Supply
Module
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
Note
The tie wrap is used to secure the power cord to the chassis in
“Powering On the AT-SBxPWRSYS1 AC System Power Supply” on
page 165.
One AT-SBxPWRSYS1
System Power Supply
One regional AC power cord
One tie wrap