Owner's manual

Page 68
Allied Telesis
AT-8000GS Command Line Interface User’s Guide
show bridge multicast unregistered
Use The show bridge multicast unregistered User EXEC mode command displays the unregistered multicast
filtering configuration.
Syntax
show bridge multicast unregistered [ethernet interface | port-channel port-channel-number]
Parameters
•
interface — Specify the required Ethernet port to display.
• port-channel-number — Specify the required Port-channel number to display.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the Multicast configuration for VLAN 1.
Console# show bridge multicast filtering 1
Filtering: Enabled
VLAN: 1
Port Forward-Unregistered Forward-All
Static Status Static Status
---- --------- --------- --------- ----------
1/g1 Forbidden Filter Forbidden Filter
1/g2 Forward Forward(s) Forward Forward(s)
1/g3 - Forward(d) - Forward(d)
console#
show bridge multicast unregistered
Port Unregistered
---- ------------
1/g10 Forward