Manualshelf

Owner's manual

ManualsBrandsAllied Telesis ManualsComputer HardwareAT-S95 CLI (AT-8000GS Series)
111112113114115116117118119120
Page 114
Allied Telesis
AT-8000GS Command Line Interface User’s Guide
show interfaces description
The show interfaces description Privileged EXEC mode command displays the description for all configured
interfaces.
Syntax
show interfaces description [ethernet interface | port-channel port-channel-number]
Parameters
•
interface — Valid Ethernet port. (Full syntax: unit/port)
• port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
g3 100M-Copper -- -- -- -- Down -- --
g4 100M-Copper -- -- -- -- Down -- --
g5 100M-Copper Full 100 Enabled Off Up Disabled Auto
g6 100M-Copper -- -- -- -- Down -- --
g7 100M-Copper -- -- -- -- Down -- --
g8 100M-Copper -- -- -- -- Down -- --
g9 100M-Copper -- -- -- -- Down -- --
g10 100M-Copper -- -- -- -- Down -- --
g11 100M-Copper -- -- -- -- Down -- --
g12 100M-Copper -- -- -- -- Down -- --
g13 100M-Copper -- -- -- -- Down -- --
g14 100M-Copper -- -- -- -- Down -- --
g15 100M-Copper -- -- -- -- Down -- --
g16 100M-Copper -- -- -- -- Down -- --
g17 100M-Copper -- -- -- -- Down -- --
g18 100M-Copper -- -- -- -- Down -- --
g19 100M-Copper -- -- -- -- Down -- --