Owner's manual

Ethernet Configuration Commands
Page 111
show interfaces advertise
The show interfaces advertise Privileged EXEC mode command displays autonegotiation data.
Syntax
show interfaces advertise [ethernet interface | port-channel port-channel-number ]
Parameters
interface — Valid Ethernet port. (Full syntax: unit/port)
port-channel-numberValid port-channel number.
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following examples display autonegotiation information.
console#
show interfaces advertise
Port Type Neg Operational Link Advertisement
---- ----------- ------- ------------------------------
g1 100M-Copper Enabled --
g2 100M-Copper Enabled --
g3 100M-Copper Enabled --
g4 100M-Copper Enabled --
g5 100M-Copper Enabled 100f, 100h, 10f, 10h
g6 100M-Copper Enabled --
g7 100M-Copper Enabled --
g8 100M-Copper Enabled --
g9 100M-Copper Enabled --
g10 100M-Copper Enabled --
g11 100M-Copper Enabled --
g12 100M-Copper Enabled --
g13 100M-Copper Enabled --
g14 100M-Copper Enabled --
g15 100M-Copper Enabled --