Instruction Manual

Address Table Commands
Page 66
Note
A Multicast MAC address maps to multiple IP addresses as shown above.
show bridge multicast address-table static
The show bridge multicast address-table static Privileged EXEC mode command displays statically configured
Multicast addresses.
Syntax
show bridge multicast address-table static [vlan vlan-id] [address mac-multicast-address |
Parameters
•
vlan-id — A valid VLAN ID value.
• mac-multicast-address — A valid MAC Multicast address.
• ip-multicast-address — A valid IP Multicast address.
• ip-address — Source IP address
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
A MAC address can be displayed in IP format only if it's in the range 0100.5e00.0000 through 0100.5e7f.ffff.
Example
The following example displays Multicast MAC address and IP Address Table information.
show bridge multicast filtering
The show bridge multicast filtering User EXEC mode command displays Multicast filtering configuration.
console# show bridge multicast address-table static
Multicast address table for VLANs in MAC-GROUP bridging mode:
Vlan MAC Address Type Ports
---- -------------- ------- ----------
1 0100.5e23.8787 static 1/e1, 2/e2
Forbidden ports for multicast addresses:
Vlan MAC Address Ports
---------- ---------------- -------------------------------------
console#