Instruction Manual

Table Of Contents
Page 261
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface Users Guide
Chapter 28.Spanning-Tree Commands
spanning-tree
The spanning-tree Global Configuration mode command enables spanning-tree functionality. Use the no form of
this command to disable spanning-tree functionality.
Syntax
spanning-tree
no spanning-tree
Parameters
This command has no arguments or keywords.
Default Configuration
Spanning-tree is enabled.
Command Modes
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables spanning-tree functionality.
spanning-tree mode
The spanning-tree mode Global Configuration mode command configures the spanning-tree protocol. Use the
no form of this command to return to the default configuration.
Syntax
spanning-tree mode {stp | rstp| mstp}
no spanning-tree mode
Parameters
stp — Indicates that the Spanning Tree Protocol (STP) is enabled.
rstp — Indicates that the Rapid Spanning Tree Protocol (RSTP) is enabled.
mstp — Indicates that the Multiple Spanning Tree Protocol (RSTP) is enabled.
console(config)# spanning-tree