Instruction Manual

Page 245
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface User’s Guide
The internal security name for SNMPv1 and SNMPv2 security models is mapped to the group name.
Example
The following example defines community access string public to permit administrative access to SNMP protocol
at an administrative station with IP address 192.168.1.20.
snmp-server view
The snmp-server view Global Configuration mode command creates or updates a Simple Network Management
Protocol (SNMP) server view entry. Use the no form of this command to remove a specified SNMP server view
entry.
Syntax
snmp-server view view-name oid-tree {included | excluded}
no snmp-server view view-name [oid-tree]
Parameters
•
view-name — Specifies the label for the view record that is being created or updated. The name is used to
reference the record. (Range: 1-30 characters)
• oid-tree — Specifies the object identifier of the ASN.1 subtree to be included or excluded from the view. To
identify the subtree, specify a text string consisting of numbers, such as 1.3.6.2.4, or a word, such as system.
Replace a single sub-identifier with the asterisk (*) wildcard to specify a subtree family; for example 1.3.*.4.
• included — Indicates that the view type is included.
• excluded — Indicates that the view type is excluded.
Default Configuration
No view entry exists.
Command Mode
Global Configuration mode
User Guidelines
This command can be entered multiple times for the same view record.
The number of views is limited to 64.
No check is made to determine that a MIB node corresponds to the "starting portion" of the OID until the first
wildcard.
Example
The following example creates a view that includes all objects in the MIB-II system group except for sysServices
(System 7) and all objects for interface 1 in the MIB-II interface group.
console(config)# snmp-server community public su 192.168.1.20
console(config)#
snmp-server view user-view system included
console(config)#
snmp-server view user-view system.7 excluded
console(config)#
snmp-server view user-view ifEntry.*.1 included