Instruction Manual

Page 155
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface User’s Guide
Chapter 13.Line Commands
line
The line Global Configuration mode command identifies a specific line for configuration and enters the Line
Configuration command mode.
Syntax
line {console | telnet | ssh}
Parameters
•
console — Console terminal line.
• telnet — Virtual terminal for remote console access (Telnet).
• ssh — Virtual terminal for secured remote console access (SSH).
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the device as a virtual terminal for remote console access.
speed
The speed Line Configuration mode command sets the line baud rate. Use the no form of this command to return
to the default configuration.
Syntax
speed bps
no speed
Parameters
•
bps—Baud rate in bits per second (bps). Possible values are 2400, 9600, 19200, 38400, 57600 and 115200.
console(config)# line telnet
console(config-line)#