Manual

AT-S47 Management Software User’s Guide
95
Examples
The following command sets the multiplexer’s IP address to
140.35.22.22, the subnet mask to 255.255.255.0, and the gateway
address to 140.35.22.11:
set ip ipaddress=140.35.22.22 mask=255.255.255.0
gateway=140.35.22.11
The following command sets just the subnet mask:
set ip mask=255.255.255.224
The following command adds the IP address 149.212.11.22 of a
management workstation as the second node to receive traps from the
multiplexer:
set snmp manager2=149.212.11.22
The following command removes the IP address which was previously
assigned as the third workstation to receive traps:
set snmp manager3=0.0.0.0