Manual

Section III: Command Line Interface
82
SET SNMP TRAP
set snmp trap=0|1|2|3|4|all
Sets which traps the management workstations are to receive.
SHOW SNMP
show snmp
Displays the community strings and the IP addresses of management
workstations to receive traps.
PING
ping ipaddress=ipaddress
Instructs the multiplexer to ping a network node.
RESTART REBOOT
restart reboot
Reboots the multiplexer.
SHOW DIAG
show diag
Runs self-diagnostics.
SHOW PORT COUNTER
show port=ports|all counter [refresh]
Displays RLL error statistics on the GBIC ports.
RESET PORT COUNTER
reset port=ports|all counter
Resets a GBIC port’s RLL error statistics counter to zero (0).