Manual

AT-S47 Management Software User’s Guide
81
Basic
Multiplexer
Commands
SET IP
set ip ipaddress=ipaddress mask=subnetmask
gateway=ipaddress manager|1|2|3|4=ipaddress
Sets the multiplexer’s IP address, subnet mask and gateway address.
SHOW IP
show ip
Displays the multiplexer’s IP address, subnet mask and gateway address.
ENABLE BOOTP
enable bootp
Enables BOOTP.
DISABLE BOOTP
disable bootp
Disables BOOTP.
SHOW CONFIG
show config [all]
Displays the multiplexer’s configuration.
SET SYSTEM
set system [name=name] [location=location]
[contact=contact]
Sets the multiplexer’s name, location, and contact.
SHOW SYSTEM
show system
Displays the multiplexer’s name, location, and contact.
SET SNMP COMMUNITY-STRING
set snmp [getcommunity=string] [setcommunity=string]
[trapcommunity=string]
Sets the Get, Set, and Trap community strings.