Manual

Section II: Menu Interface
50
The Module Configuration menu for a multiplexing port is
displayed in Figure 22.
Figure 22 Example of Module Configuration Menu - Multiplexing Port
The fields in the Module Configuration menu for the multiplexing
ports are defined in the table below:
Parameter Description
Port - Link
Indicates the status of the multiplexing port. Refer to
Table 2 on page 45 for descriptions of the possible
statuses.
Channel (1, 2, 3, 4)
or
Channel (5, 6, 7, 8)
Displays the status of the GBIC ports handled by the
WEST (OPT A) or the EAST (OPT B) multiplexing port.
• Channels (1 to 4) are displayed when the WEST
(OPT A) multiplexing port is selected.
• Channels (5 to 8) are displayed when the EAST
(OPT B) multiplexing port is selected.
The statuses are:
• Port Active - The GBIC port can send traffic through
the multiplexing port.
• Port Shutdown - The GBIC port cannot send traffic
through the multiplexing port.
Module 9 - OPT A
Port Link
Tx Online
Rx Online
Channel Active/Shutdown
1 : Active
2 : Active
3 : Active
4 : Active
Module name
CH 1
CH 2
CH 3
CH 4
> Link Test Disable OPT A
Link Test Enable OPT A
Return to Module Status Menu...