Manual

Section II: Menu Interface
26
Configuring Basic Multiplexer Parameters
This section contains the procedure for setting the following
information:
❑ IP address
❑ Subnet mask
❑ Gateway address
❑ SNMP manager addresses
❑ Download password
❑ Community strings (Get, Set, and Trap)
❑ Location
❑ Contact
❑ BOOTP (Disable / Enable)
To set these parameters, perform the following procedure:
1. From the Main Menu, select System configuration.
The System Configuration Menu is displayed in Figure 6.
Figure 6 System Configuration Menu
2. Select IP Parameters.
System Configuration Menu
System name Null (not configured)
Omega Options
IP parameters
Trap parameters
Terminal configuration
Return to Main Menu ...